|Pump compatibility:||For flow pumps|
|Connector:||G1/4" inner thread|
|Fillport:||G1/4" inner thread|
|Number of connections:||2|
|LED hole:||Available (for 5mm LEDs)|
|Material:||Plexi, POM, Brass|
|Model of reservoir:||2x 5 1/4" Bayres|
|Dimensions:||91 x 148 x 84mm|
The second version of the Alphacool Repack Dual Bayres 5,25" is now available!
Based on the development of the Alphacool Repack Dual 5.25 Bay Station, this Bay reservoir also brings its advantages to the table: Easy mounting, compact dimensions and appealing design! All of these features and many more are implemented in the Alphacool Repack Single Bayres. But Alphacool would not be Alphacool, if this new product would not also have some extremely interesting new features, which were not available until now!
The Alphacool Repack Dual Bayres 5,25" - Rev.2 is designed for installation in the front of an enclosure. Two vacant 5.25” drive bays are needed. By default, the connection of in- and Outlet can be achieved via ¼” threaded openings. Additionally Alphacool offers the possibility to use 3/8” threads for reduced flow resistance. Of course all four openings can also be used parallel, e.g. to allow installation of a second cooling loop.
New technologies implemented in the Alphacool Repack Dual Bayres:
So far everything sounds like a standard reservoir, but the developers have integrated some great features to improve the reservoir and its functionality:
Unlike most reservoirs, where the coolant is sent around multiple corners, still leaving micro-bubbles in the coolant, this reservoir utilizes a new technology: Both In- and Outlet openings are equipped with a special filter which eliminates even the smallest bubbles in the coolant!
Filling has always been a hassle with standard slot-in reservoirs: Unscrew, pull out, fill, push in and tighten screws again. Enough of this! The front of this reservoir has a filling straw which can be taken out by unscrewing it. As it is hollow, it can now be used for filling of the reservoir. We recommend using a filling bottle or funnel from our portfolio.
The front of the reservoir, the component which mainly remains visible after installation, is just beautiful to look at: Plexi, Acetal and a fill level indicator in combination with the typical Alphacool copper create a truly elegant design. Lighting is the next step towards a perfect system: At the rear of the reservoir, up to six 5mm LEDs can be inserted.
Highlight: From the top a 10cm long cold light cathode can be inserted! This is the ultimate lighting source four your reservoir. In combination with the LEDs it is even possible to have different colors inside of the reservoir. Especially with a Heatmaster as a controller, the possibilities are endless!
More power, better looks, easy handling and high quality: This is truly a First-class reservoir for your system!
- Material: Plexiglas/Acetal, brass
- Color: Transparent/black/copper
- Connection threads: 2x ¼“ and 2x 3/8”
- Dimensions (L x W x H): 91 x 148 x 84mm
- Pre-drilled holes for 6x 5mm LEDs
- Mount for 10cm CCFL
Conforms with ROHS
Extent of delivery:
- 1x Alphacool Repack Dual Bayres 5,25" - Rev.2
- 6x Mounting screws
- 2x 3/8” screw plugs
- Allen key
Due to the large number of different enclosures, complications may arise when inserting the Dual reservoir. The dimensions of the reservoir were made to fit flush in the front of the enclosure, meaning that internal modifications to the enclosure may be needed for installation.
Note: The copper-colored logo is covered by a protective foil. To have the logo shining and clean, simply remove this foil.
Note regarding cathodes:
We have measured that the cathodes have manufacturing tolerances of up to 0.3mm, even amongst the cathodes in the same package. As the fit of the cathodes is meant to hold them in place, it might be that due to the tolerances the cathodes will not fit at first. The small amount of excess material can easily be removed with a few brushes of sandpaper.
Important Note: Please note that the firm Alphacool International GmbH accepts no liability for damages of this product by using other coolants. We would like to point out that other coolants as inhibitors often contain or other corrosive substances attack the acteal, plase only usw our Cape Kelvin Catcher.
This product has been tested for you
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
Klicken Sie hier, um diese Frage(n) anzuzeigen.
Click here to show.
Optisch sehr sehr schön anzusehen und auch qualitativ der Hammer. Vor allem die Einfüllmöglichkeit über die Front ist sehr angenehm.
Filling port built in on the front saves a lot of work trying to fill a loop with a bay res. Solid build for a solid price.