Universally deployable Fillport for water cooling systems. The Fillport can be connected to the reservoir with a piece of hose and allows comfortable filling and de-aeration without opening of the enclosure if the Fillport is installed in the top of the enclosure.
Installation of the Fillport:
- Drill a hole with a diameter of 1.99cm into the top or side of the enclosure
- Push the Fillport into the hole
- Secure the Fillport with the plastic nut at the bottom
- Connect the tubing to the reservoir or T-piece
- Secure the tubing with a hose clamp or zip tie
Material: Black nickel plated brass
Thread size: G1/4" (Fitting not included)
Thread diameter: 19.9mm
Maximum diameter: 24.8mm
Height above enclosure: 3mm
Height of nut: 5mm
Please note: Screw plug, fitting and spacer not included. Please order separately (see accessories category).
Extent of delivery:
Fillport with O-ring and counter-nut
Click here to display this question (s).
Click here to show.