- Article no.: 16116
- Manufacturer no.:
- EAN: 4049469083977
- Weight: 0,026 kg
> 5 ready for shipment, delivery time 1-3 days
Prices excl. VAT plus shipping costs
As many major manufacturers of waterblocks do not ship sufficient installation material with their blocks, this is the perfect supplement. With this kit you can be sure that everything needed for installation is included in high quality parts. This kit is also useful if any parts of the original installation kit are lost: they can usually be replaced easily thanks to its standardized components.
Suitable for all coolers with up to 4 mounting holes!
For mounting in combination with a backplate on CPU blocks:
Together with a self-adhesive backplate, your socket kit becomes a block-exchange station that makes it possible to mount or remove your block in seconds. The self-adhesive backplate is fixed to the mounting holes behind the board, the screws go through from behind, and are fixed into place using a washer and nut. Then, the cooler can be placed onto the holes and, using a spring and knurled nut, you can determine the pressure yourself so the motherboard does not warp.
Scope of delivery:
4x Screws: DIN 7985 M3 x 40 cross flat galvanised
4x Knurled nuts: DIN 466 high form M3 galvanised
4x Nuts: DIN 934 M3 hex galvanised
4x Stainless steel springs: M4 x 14mm
14x Washers: DIN 125 M3 PA plain
Notice: The 45mm screws are too short for the EK supreme HF. 50mm screws are required!