- Article no.: 49089
- Manufacturer no.: 6000403
- EAN: 4049469113520
- Weight: 0,76 kg
1 available in stock
The Laing D5 with a different approach:
Besides the standard elements of the Laing D5 (Item 49029) which are have been known for years this "Solar" version has additional features: Besides the extremely long lifespan and the low noise emissions thanks to a unique bearing design this version also has an extremely low starting voltage as it was designed for operation with solar panels. The low starting voltage allows the user to run the pump at very low speeds whilst still maintaining plenty of flow. The pump has a current draw of 0.25A-1.45A (Important: Check compatibility of the sockets!), allowing both absolutely silent operation and powerful use of the same pump when controlling the pump's speed via a fan controller.
This pump is perfect to give you the choice from two extremes and anything in between!
Technical specifications
- Dimensions: 90 x 90 x 90mm (without fittings)
- Motor design: Electronically commuted ball motor
- Nominal voltage: 12V DC
- Max. Power consumption: 22W
- Current draw: 0.25-1.45A
- Voltage range: 8-14V
- Pressure head at 12V: 3.7m
- Maximum flow: 350l/h
- Supportet media: Water-/ glycol mixtures
- Maximum system temperature: 95°C
- Materrials in contact with medium: Stainless steel 1.4571, PPS-GF40, EPDM O-rings,
- Aluminium oxide, hard coal
- Connection threads: 2x 1/2" inner threads
Extent of delivery
- 1x Laing D5 pump12V D5solar-38/700
Mounting system not included
Important:
The Laing pump's electronics are not waterproof. Please make sure that the electronic components do not come in contact with water during installation or when working on the pump. When replacing the top always ensure a proper fit of the O-ring seal and avoid spills when filling the Laing reservoir. Damages due to water in the electronic components are not replaced by Laing!
Please note:
The power cable of the pump is not equipped with a plug. We hence recommend to order tem No. 82021 for connection of the unit. The image gallery shows the cable / Pin order
This Produkt has been reviewed for you
- Hardwareluxx (Userreview)
- xtremesystems (engl. Userreview)
Color: | black |
Possible control range: | 8-24V DC |
Approved fluids: | Water, Water/ glycol mixture |
Max. Discharge head: | Good (2 to 4m), 3,7m |
Max. Flow: | Extreme (more than 1400l/h), 1500l/h |
Voltage: | 12V DC |
Power connector: | 4Pin Molex |
Water inlet: | G1/2" inner thread |
Manufacturer: | Laing |
Material: | Stainless steel, Alumina, Hartcoal |
Max. System temperature: | 95° C |
Water outlet: | G1/2" inner thread |
Dimensions: | 90 x 90 x 90 mm |
Power input: | 22W |
Click here to display this question (s).